G-TEC natural gas compressors boosters for all diamond district jewelry manufacturers

Learn about how the new

NYC Fire Code

affects your shop

Torch Boosters are

Easy To Install

in your shop

Torch Boosters are

Approved

across the US and Canada

Please

Contact G-TEC

with questions

You can

Order A Torch Booster

from a Distributor or G-TEC

TB-15 and TB-30 Torch Boosters are quiet and can be installed right next to your benches.

Return to Top of This Page / Return to Home Page

What is the right Torch Booster for my shop?

If your shop uses 1 or 2 torches and you don’t do any casting then the TB-15 Torch Booster is the right system for you.


If you have 3 or 4 torches, or do occasional casting, then you should choose the TB-30 Torch Booster. TB-30 can supply four bench torches at the same time, or 1 casting torch, but not all of them at the same time.


If you have all four torches and a casting torch in use at the same time a TB-60 Torch Booster is a better choice. Go to the TB-60 page.


How does a Torch Booster work?

Both systems connect to your low-pressure utility natural gas pipe and boost pressure high enough to make gas flow through the flashback arrestor check valve and give you a hot flame on the torch.


Turn the Torch Booster on in the morning and off at the end of the day  and that is all you need to do. Torch Boosters automatically supply the right amount of natural gas - you don’t need to adjust it during the day.


Torch Boosters are quiet and can be installed right next to your bench jewelers.


They boost utility natural gas to 25 psi, then you use a regulator to lower pressure to between 3 and 7 psi, which is the recommended pressure for most bench torches or 10 psi, which works best for casting torches.


How big is a Torch Booster?

TB-15 and TB-30 Torch Boosters are compact; 12 “ wide, 12” tall and 16” deep. They weigh about 50 lbs.


Both systems use 120V 15 amp electrical power.


Both systems require a 1/2” utility natural gas supply pipe.


Order a TB-15/TB-30 Torch Booster



Click on our YouTube link to see and hear more about TB-15 and TB-30 Torch Boosters for jewelry manufacturing. Get an overview of how the Torch Boosters works, how to turn the system on and off, how to install it, safety features and where to buy your Torch Booster.


Is a Torch Booster quiet enough to use in your shop? The system is running during the entire video - look, listen and hear for yourself!

Download annual scheduled maintenance instructions

TB-15 TB-30 Maintenance Instructions

Learn about the

Advantages of Hi Pressure

natural gas for jewelry manufacturing

Learn about how the new

NYC Fire Code

affects your shop

Torch Boosters are

Easy To Install

in your shop

Torch Boosters are

Approved

across the US and Canada

Please

Contact G-TEC

with questions

You can

Order A Torch Booster

from a Distributor or G-TEC

Learn about the

Advantages of Hi Pressure

natural gas for jewelry manufacturing

TB 15 TB 30 FDNY Version.pdf

Download a TB-15/TB-30 Brochure

Scheduled Maintenance - Keeping your TB-15 and TB-30 Torch Booster in top condition is easy. We recommend changing the Filter Drier, Backflow Check Valve and Pressure Limiting Check Valve every 2,000 hours.

Call G-TEC at 1-800-451-8294 to order a TB-15/TB-30 Maintenance Kit.


Click on the YouTube link below to watch a short video showing how to install Maintenance Kit parts.

TB-15 And TB-30 Torch Boosters For Up To 6 Bench Torches

Watch Our YouTube Video To Learn More About TB-15 And TB-30 Torch Boosters